Wednesday, August 13, 2014

How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit

Hello everyone, yesterday my friend asked me to help him to eliminate a HASP dongle from his PC. His PC was installed Strand7 and it needs a USB dongle which has type HASP to work exactly. I accepted his request to help him. I noticed that his PC was installed Windows 7 64 bit Professional.
I searched on Internet and read many web pages regarding dongle emulator. I found a emulator named EDGEHASP2007 but unfortunately it didn't work on Windows 7 64 bit. Then, I continued searching on Internet and I found HASPHL2010 but it is not free so I didn't try it. I thought I will give up but I still hope I can find a free emulator. Fortunately, I found this page https://www.techidiots.net/notes/emulate-hasp-hl-pro-1/emulate-hasp-hl-pro describing some steps for installing MultiKey emulator but it noted that you must re-install your software on Windows XP 32 bit after which you must use some tools to dump HASP key and create registry file. Because I didn't have Windows XP I cannot follow this method. I searched on Internet again and I found this tool [Universal HASP SRM / HL / 4 / Hardlock Dongle Dumper v.1.3]. It can dump HASP key and create registry file for you altogether. It's a awesome tool made by rengteam. Great thanks to rengteam. Finally, I managed to install MultiKey USB Dongle Emulator.

Now, I want to write some steps here:

Note: I cloned successfully all types of dongles with MultiKey Emulator. The most important step is that you must generate exact registry file. If you have any problem, please drop a comment.

1. Download necessary tools
Download necessary tools here https://drive.google.com/file/d/0Bwv-LAG1rD9ZcTY3dVdidDJHZHc/view?usp=sharing
Password: sonand.com

For dongle Sentinel SuperPro/UltraPro, please download this additional tool https://drive.google.com/file/d/0Bwv-LAG1rD9ZU1JqNy1XOHEyTXM/view?usp=sharing

2. Get dongle password
If your dongle type is Sentinel SuperPro/UltraPro, please skip this step!
The following steps are original here http://www.dongleservice.com/emulate-hasp.phtml, please follow them to get your dongle password. In my case, dongle password is 725F:583A

Start dumper

Run HASPHL2010.exe on machine that has latest version of Aladdin HASP HL dongle drivers installed and original parallel port or USB dongle connected to computer.

Service installation

HASP/Hardlock dumper and emulator designed as low level kernel mode driver and requires Administrators privileges to be installed.
When you start HASPHL2010.exe for a first time you'll see following window.
Emulate HASP dongle
Press "INSTALL" button and if installation was successful Driver status window will be changed to "Status : driver is installed"

Starting service

Now you need to open "Emulator" tab.
HASP HL dongle emulator
Then you press "Start Service" button. If everything is ok you'll see
HASP HL dongle driver

Running your software

To find your key it is necessary to start protected software.

Reading your key.

Open "DUMPER" tab.
HASP HL dongle dumper
HASP/HL Dongles window shows logged HASP dongle passwords. In this case, dongle password is 3C39:25A0
3. Create registry file
Now that you already got your dongle password. It's time to generate registry file.
If your dongle is Sentinel SuperPro/UltraPro, please use SSP2MK_1.2 to generate registry file.

If your dongle is HASP or HASP HL then you need to use RTDumperGUI to generate registry file. Please carefully read readme.txt file before doing. For HASP (or HASP HL) dongle you must input two parts of your dongle password into two contiguous textboxes. For example, my dongle password is 725F:583A so I must input 725F into the first textbox and 583A into the second textbox. 
In my case, I got registry file RTDumperGUI/hasp_725F583A/725F583A___.reg. You should rename it to 725F583A.reg and then open it and replace [HKEY_LOCAL_MACHINE\System\CurrentControlSet...] with
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\725F583A]

Now we are ready to eliminate the dongle


4. Install MultiKey USB Dongle Emulator
- Register 725F583A.reg into Registry by right click on it and select Merge

- Click start button , type uac, then press Enter. It will show User Account Control Settings, please decrease UAC level as follows:



- Install MultiKey32 or MultiKey64 (it depends on your OS, for example Windows 7 32 bit, Windows 7 64 bit). If your OS is 64 bit, then open folder MultiKey64 and do as follows:




You wait for a while, you will see a popup asking you to install a unsigned driver. You must accept to install it anyway. And then, you wait for finishing driver installation successfully.


5. Sign driver by [Driver Signature Enforcement Overrider]

You execute dseo13b.exe and do as follows:

Select [Enable Test Mode] and click Next button

Select [Sign a System File] and click Next button

Find [C:\Windows\System32\drivers\multikey.sys] in your OS, it must exist in your OS. If it doesn’t exist, please reinstall MultiKey again.

Input in the textbox [C:\Windows\System32\drivers\multikey.sys], click OK

Select [Exit] and click Next button to exit

Now you have to restart your PC, hold down F8 key on your keyboard, you will see the Advanced Boot Options screen, you select [Disable Driver Signature Enforcement] as follows:



Press Enter to boot Windows. After Windows is booted it will install the unsigned driver automatically. You should verify the new driver as follows:
Press key combination Windows + R, type devmgmt.msc, press Enter. It should show


Now you can start your protected software and enjoy it. From now you will don't have to remember to bring/plug USB dongle.

Good luck :)

157 comments:

Anonymous said...

Thank you very much for writing these instructions. I followed them and it worked great.

I have a question, though. Once everything is installed and working, so I still need to keep the computer in Test mode? I followed your steps and used the Driver Signature Enforcement Overrider to sign the multikey.sys file, so I assumed that at that point I could disable Test mode. But when I did that, the software asked for the HASP.

I am a little concerned about keeping the computer permanently in Test mode. Can you give me some advice?

Son Nguyen said...

Hi there,
You use Driver Signature Enforcement Overrider to turn on the Test mode and sign the driver. But its certificate is unverified by Microsoft. That's the reason why the driver is only loaded in the Test mode. Sorry about this!

Anonymous said...

Hi,

I´m having some problem. My dongle is a HASP4 lpt. Do you know how can I emulate it?

Son Nguyen said...

No problem, you just need to change a bit registry file as follows:
Change "Type"=dword:000000EA to "Type"=dword:0000004A

Anonymous said...

Hi, this method works for the hardkey e3 ellipse (www.elipse.com.br)?

Anonymous said...

Any idea how to make this work with HASP SRM? Specifically trying to make e-Prime work (pstnet.com). We have lost 2-3 of these dongles @$1000 each :/

Son Nguyen said...

For HASP SRM, the tool [Universal HASP SRM / HL / 4 / Hardlock Dongle Dumper v.1.3] also supports to generate registry file.

Ashish Tiwari said...

Hi is this process work for for hasp srm 3.25

Anonymous said...

Son Nguyen, today you are my Son Goku. Thank you for saving my world.

mr2face said...

thank you so much. you're a lifesaver. saved me $400.

Anonymous said...

Thanks for your post, works perfect with HASP HL dongle !

Anonymous said...

Thank you fot the instruction, but how can I replace
[HKEY_LOCAL_MACHINE\System\CurrentControlSet...]
with
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\725F583A]

Son Nguyen said...

Firstly, you have to use RTDumperGUI to generate registry file. In folder RTDumperGUI, there is one file readme.txt you please read it to know how to generate registry file. After generating registry file, you open it and replace [HKEY_LOCAL_MACHINE\System\CurrentControlSet...] with
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\XXXXXXXX]. Where XXXXXXXX is your dongle password.

Anonymous said...

Thank you very much for posting this info. It has helped me tremendously in multikey running properly.

Kriss said...

Hi Son, thanks for that.

I'm blocked in the first part with the dumper, with a problem with windows uac..i tried the driver signature enforcement override but nothing, the problem still the same.

Any ideas ?

Thanks

Son Nguyen said...

Hi Kriss,

Sorry for late response!
Could you please describe clearly your specific problem? I think I can help you if I know what is the exact problem.

Valentin Olaru said...

Thank you very much for your tutorial.
But I after I follow it, in Device manager under Universal Serial Bus Controller the SafeNetInc USB Key have an yellow exclamation sign and the message is "This device cannot start. (Code 10)".
With the dongle inserted I have 3 lines:
SafeNetInc USB Key
SafeNetInc HASP Key
SafeNetInc Sentinel HL Key

Son Nguyen said...

Don't worry Valentin Olaru.
I guess your dongle is a type of HASP HL. You need to edit a little bit the registry file. Please open the registry file and change "Type"=dword:000000EA to "Type"=dword:0000004A. After that, you must Merge it into Registry and then restart your PC. Good luck :)

Mihai Abrudan said...

Hello. First of all thank you for this great post. I tried to clone a usb HASP HL dongle, everything went ok but the application that requires the dongle does not work, saying "no security key detected". The drivers seem to be installed ok, I have changed the dword for Hasp HL, in device manager I have SafeNet Inc. HASP Key and SafeNet Inc. USB Key
but when the dongle is connected there is a new one called SafeNet Inc. Sentinel HL Key and two SafeNet Inc. USB Key . Any ideas? Thank you!

Son Nguyen said...

Hi Mihai Abrudan,

For HASP HL, maybe I already got the same your problem and I fixed by changing "Type"=dword:000000EA to "Type"=dword:0000004A. In addition to this, I cannot remember anymore. If it is possible please send me your application and registry file I will try to help you.

Anonymous said...

I have an Aladin LPT HARDLOCK key. Windows 7 will not see it so I had to create the registry file in window xp and move it to windows 7. It says the key is installed and running in the registry and program but the program is not working properly. Here is the reg file output.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\000029FD]
"Name"="Dump for 29FDh (10749) dongle"
"Copyright"="None"
"Created"="23.10.2014 16:32:37"
"DongleType"=dword:00000002
"ID"=dword:FFFFFFFF
"withMemory"=dword:00000001
"Seed1"=dword:00008E17
"Seed2"=dword:0000F243
"Seed3"=dword:000036B2
"HlkMemory"=hex:\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00

Anonymous said...

You can disregard the last comment. I figured it out. The program settings got changed somehow during the install of these files. Once I set up its network settings again it started pulling the data and working fine.

Your a life saver with this process!!! Thank you!

As a note to others the reason I did this was because I had to upgrade my computer and windows 7 would not recognize the dongle or load it. You can create your registry key on an xp machine and use it on windows 7.

John said...

Hi I am having a problem.

When I get to the 'dumper' stage and load my protected software to capture the password, a license error pops up that says: "HASP SRM protection key is no longer available. Error code 7: HASP_HASP_NOT_FOUND."

The dongle I am trying to emulate is a Safenet Sentinel HL key.

Do you have any idea how to resolve this issue?

Thank you

percival said...

Hi there,

I am trying to install the Multikey.sys on windows 7, 32 bit of which works fine on my other computer but it would not go on my new computer which also have win7 32 bit. I am using HSP Device Driver Version 5.22. Can you please help me as I would greatly appreciate your help.

Anonymous said...

Would you have time to advice me, please. I followed your steps. I also changed
"Type"=dword:0000004A

All seemed to work as you said except when I check the very last step to see the safenet items in the usb list they do not show. If I try to run my software with dongle removed it treats it as if the dongle is not there.

I believe my dongle is HASP HL.

Below is cut/paste of reg

Thanks for any help you can provide.

REGEDIT4

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\56C93067]
"Name"="Dump for 56C93067h (1456025703) dongle"
"Copyright"="None"
"Created"="05.11.2014 19:34:10"
"DongleType"=dword:00000001
"SN"=dword:5C742078
"Type"=dword:0000004A
"Memory"=dword:00000001
"SecTable"=hex:B8,B8,B1,B1,D8,D8,D1,D1
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,0F,01,0D,01,0A,1E,15,00
"Data"=hex:\
83,1F,34,00,4B,00,52,00,44,00,52,00,52,00,4D,00,\
44,00,45,00,4B,00,45,00,52,00,4E,00,4C,00,43,00,\
44,00,4A,00,48,00,45,00,46,00,41,00,41,00,48,00,\
44,00,4C,00,4A,00,52,00,42,00,45,00,4B,00,43,00,\
44,00,4C,00,4C,00,51,00,51,00,50,00,41,00,52,00,\
50,00,45,00,41,00,50,00,52,00,4B,00,45,00,4D,00,\
42,00,4D,00,4E,00,45,00,52,00,51,00,00,00,00,00,\
57,42,50,54,01,00,00,00,10,00,00,00,00,00,28,B1

"ColumnMask"=dword:000000BB
"CryptInitVect"=dword:00000033

Eric said...

Hi, does this method work even with a parallel port Sentinel SuperPro?

Thank you for your work ;)

Anonymous said...

Hi, do you might have an idea what type the "SafeNet Sentinel Dual Hardware Key" would be?
The SSP2MK did export as "DongleType"=dword:00000003
but that's Sentinel Super Pro 7067 and not "SafeNet Sentinel Dual Hardware Key".
A hint I would appriciate.
Thanks

ΔΙΟΙΚΗΤΙΚΟ ΣΥΜΒΟΥΛΙΟ ΣΔΜΕ said...

I am having a problem with the dump. It shows the 8digit number but it seems that it stuck (the bar doesn't move on. Finaly it creates bmp file but i think it is small only 1kb and its not working.

Son Nguyen said...

Sorry you guys! Currently I am having some troubles so I cannot support you guys anymore. I hope that I can get back in the nearest future.
Thanks for reading my blog!

mohan said...

dear sir
i am unable to download your google drive software

Son Nguyen said...

@mohan: could you describe your problem? Why can't you download?

spvoly said...

hi, may i know how to upgrade .dng version. it can't open using HASPHL2010.exe. thanks for reply.. please email to spvoly@gamil.com

radu said...

hy. i am wondering if i can install the program without a hasp key, because i dont have the hasp key. can this pe possible? thank you!

Stefan P said...

Hi,

My dongle is HASP HL and my computer is running Win7 64bit. After I run Multikey it installs a device called "Virtual USB MultiKey" under System Devices in Device Manager. It would not show any other devices under "USB controllers" tab. Please help.

Anonymous said...

Hi,

My dongle is HASP HL and my computer is running Win7 64bit. After I run Multikey it installs a device called "Virtual USB MultiKey" under System Devices in Device Manager. It would not show any other devices under "USB controllers" tab. ints not installed that 2 files, pls help me

Anonymous said...

HI,

SRY THAT'S MY MISTAKE ITS WORKING FINE ,THANK'S LOT. GOOD JOB

silence said...

im having some issues, I am trying to emulate a safenet setinel superpro, I need to emulate on server 2012 r2 x64. In the past i always emulated with winxp 32 bit, using sentemul2007. any suggestions?
Thanks for your time on this.

AcaR said...

Hi Son,

your page was very useful for me because it cleared ambigous instructions in many documents on Internet.
However, for my HASP HL dongleRTDumperGUI didn't worked.
h5dmp.exe from https://www.techidiots.net/notes/emulate-hasp-hl-pro-1/emulate-hasp-hl-pro made much different .reg file compared to RTDumperGUI.
At least, this other worked.

Thank you and best wishes!

praful kalal said...

i have ibinder company base

Senselock EliteIV v.2.x USB

software but this software not

work without dongle please help me

i send the dongle based software mediafire link ... http://www.mediafire.com/download/9jfrf2i7c6ldv5q/software.rar

my emmail id kalalpraful@gmail.com

Niru said...

Hi ,

By the USB port dongle its working , i have HASP4 LPT1 port dongle , do you have any idea to use that like this USB dongle....

Anonymous said...

è possibile emualare 2 dongle che hanno la stessa password, ma contenuto diverso??

Anonymous said...

Hi,
I hope you can help me with this issue:

I already have installed the multikey, because i've been using the software with a simple SafeNet USB SuperPro/UltraPro since 2011, but its key have changed. With the new key i can see in my system 3 devices: Safenet Inc. Hasp Key, Safenet Inc. Sentinel Hasp Key and Safenet Inc. Usb Key.
i have used this tool "Sentinel SRM/HASP/HL Dumper v.1.3 (public) build on (21:16:27 May 30 2013)" trying to dump that new key
and my results are (for Backup HASP SRM):

1) A file named "Dump_EA_78927_0.dmp.log" with this information:

Sentinel SRM/HASP/HL Dumper v.1.3 (public)
build on (21:16:27 May 30 2013)

>>>> START SENTINEL HASP DUMPING <<<<
Found: SafeNet Inc. USB Key (0)
And trying to read it...

Success to open device...
Key Type: 0xEA
Vendor ID: 78927 (0001344F)
Hasp key ID: 2041614119 (79B08F27)
FW Revision: 3.25
HW Revision: 6.1.0
Dongle Form: 84 (54)

Dumping, please wait ...
RW memory size: 112 (0070) (6)
RO memory size: 112 (0070) (7)
Feature number: 11 (000B) | 3 (0003)
Read sysinfo: OK (code 00), (status 0)
Read RW memory: OK (status 0)
Read RO memory: OK (status 0)

Saved Dump_EA_78927_0.dmp

CONTINUE....

Anonymous said...

2) A file named "Dump_EA_78927_0.dmp" with this information:

REGEDIT4

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Shaspbus\Dumps\00000000]
; Sentinel SRM/HASP/HL Dumper v.1.3 x64 (public)
; rceguru@gmail.com

"FatData1"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8,\
F7,79,BB,01,59,D6,8D,A2,6D,F3,7B,06,62,FB,EA,C5,\
53,B6,08,85,E7,32,B0,2E,BB,5E,A6,D9,2D,D1,B2,B9,\
69,03,BB,E7,9B,F9,F1,5B,2F,09,6A,11,38,18,DD,36,\
4C,AB,A4,CD,C5,1C,2E,C8,E9,5E,CC,96,49,13,E2,A6,\
EA,53,FB,FE,E4,40,D7,06,7E,24,67,F8,06,39,25,4B,\
FC,3C,61,63,89,07,80,6E,4D,AE,4D,3A,DA,75,2A,34,\
73,20,C4,97,67,76,FE,CB,7F,15,CF,EA,11,FB,98,0E

CONTINUE...

Anonymous said...

"FatData2"=hex:\
EE,A1,A6,86,9C,5F,4C,5B,23,AD,12,79,7D,93,68,B8,\
FE,5B,54,AB,0F,F2,8D,1E,DC,EA,B8,82,6E,16,A5,53,\
9B,19,54,A0,0A,BD,13,68,CA,AF,8E,83,A9,87,0B,DC,\
B5,2D,D6,BE,7B,FE,5A,3D,64,4A,61,77,FC,2C,63,17,\
B4,50,B9,CF,FA,08,40,6A,D4,CF,98,26,E8,3E,67,CB,\
0B,58,50,E6,CC,82,4A,61,E9,CD,BD,DD,64,F6,0E,34,\
19,2A,01,38,75,CC,3F,B2,75,EF,64,80,1F,84,F7,5A,\
16,9A,A1,62,26,69,D8,B9,41,16,E2,EE,25,58,DC,42,\
5B,FC,FC,1D,73,5A,82,CC,D0,BC,4B,40,46,FE,C2,5D,\
A4,84,ED,FB,14,87,5F,4B,C6,CC,9D,82,93,1E,31,5F,\
F3,92,A4,85,59,F9,75,5E,AD,DA,F7,02,14,C2,69,24,\
E1,6A,28,CF,56,49,EA,13,D1,38,09,AD,B9,BA,47,D4,\
ED,D7,CB,17,37,D0,55,4F,83,3A,32,20,66,0A,81,62,\
93,B0,58,A9,7E,E5,9B,3B,E7,C0,45,6A,93,B5,56,EE,\
2C,64,FB,05,AC,34,45,82,94,BE,F3,A4,44,62,94,23,\
51,2E,FC,17,73,B4,F1,82,0A,BE,D3,0C,9C,A6,B1,A8,\
1F,08,7C,44,5D,16,C1,63,29,54,91,81,21,29,C1,32,\
25,1D,BF,64,7B,47,C0,05,A1,F3,B6,18,C7,8A,CF,39,\
E6,F6,3C,31,CF,92,A6,1B,13,50,75,9D,40,00,ED,CA,\
9F,AF,03,1D,C5,28,20,68,9C,D4,1D,19,0C,5B,2B,5E,\
8D,5B,05,CA,0C,62,EB,49,50,C5,B9,B7,BE,AD,5E,5B,\
DC,9F,8F,B4,04,1D,70,D8,5F,68,C0,7A,7A,D7,52,42,\
4C,82,82,64,7F,06,08,F3,93,0E,0A,99,5F,35,1F,01,\
69,51,AE,B5,BA,55,F9,EF,3A,A7,15,D6,26,3C,D3,AC,\
AA,68,E2,14,66,5C,CC,E3,A1,20,7C,1C,F0,31,25,E5,\
91,70,F4,04,24,6D,1D,4E,30,83,AA,16,D1,63,97,7B,\
F6,BC,DC,D7,A1,AA,41,8E,97,86,3C,53,69,5E,08,F0,\
E2,A0,3B,D3,EC,6B,8A,86,58,4E,3F,76,1D,9D,05,89,\
EE,39,C0,0B,1D,86,A2,F4,3E,B2,FF,2E,B0,FE,F3,EF,\
D4,EF,49,BE,30,94,06,6A,25,67,4C,EE,BF,EF,9A,39,\
0C,4B,4C,C2,61,50,EA,BA,23,3E,D4,77,89,8D,A6,E3,\
2D,9C,8E,9F,F5,B9,B7,C3,24,35,CC,5E,D6,B3,5B,F5,\
52,4A,6D,8D,3B,11,5A,0E,9C,E0,5D,37,14,68,E1,A7,\
AE,F2,B7,FE,93,62,99,24,AE,DA,D9,B0,65,FE,71,1A,\
E9,FE,03,2D,47,16,E2,47,3C,50,26,C4,4D,90,F3,B7,\
64,39,AF,27,33,52,8C,CF,97,CE,B5,5A,63,0E,17,4C,\
18,86,09,F1,3B,89,E7,EC,78,F5,07,C6,BE,35,CA,49,\
B5,B2,6F,3A,6A,A3,CB,00,46,03,6A,7B,0E,47,69,41,\
7C,2A,4D,34,62,A4,5D,2E,C5,04,63,0F,E8,7A,53,AE,

CONTINUE...

Anonymous said...

DF,18,6A,EE,47,F2,24,A1,64,E6,29,5F,13,4F,85,EB,\
95,13,E6,1D,0F,DB,E5,80,CE,57,8E,3A,F2,2E,DC,95,\
31,FA,E0,35,E4,BD,9B,2E,F7,5F,31,6F,FF,81,63,D1,\
C7,71,F7,CF,54,3C,BB,2D,6C,C8,F0,32,FC,64,96,D9,\
CA,46,80,73,6A,DC,4B,1E,BA,6C,A5,A6,EF,40,49,7F,\
E8,B8,9A,CF,6B,DD,2F,B2,DC,6B,7B,72,DB,6F,49,D8,\
17,F1,0B,83,97,7E,37,14,12,2C,D6,4F,61,2F,21,E4,\
6B,3F,1F,00,A4,E4,B7,3F,CA,E2,25,5E,E6,49,3A,DB,\
40,7B,67,DC,80,22,9D,40,D1,2A,5A,3B,1A,0B,B9,56,\
57,A3,8B,B5,42,FF,6A,A4,0A,97,9A,FB,B5,59,09,25,\
BD,2E,B3,22,7D,4C,D3,F3,D0,DD,09,3B,F5,A1,B9,8D,\
9F,49,EA,98,FD,46,8D,D1,DF,1E,C8,D6,CD,65,FE,C0,\
66,8F,DA,F7,96,44,A0,CE,C8,88,FF,5B,B4,66,41,F8,\
00,46,51,49,03,76,09,09,BC,22,95,2B,23,DB,8D,14,\
C7,E5,12,0A,F1,A1,70,43,6F,60,C5,05,68,B0,EC,32,\
EB,A9,11,3B,D0,64,63,30,F0,F7,CD,4D,25,B7,DB,D3,\
BB,5B,0E,14,68,26,9F,8E,66,CD,82,9A,B1,36,18,B4,\
44,CF,EF,0D,B9,94,5A,05,98,93,67,46,95,98,E3,3F,\
92,04,78,C3,A0,29,0D,83,D5,D8,02,BC,F9,6B,8B,D5,\
51,4B,5B,10,91,62,C9,B2,0F,B2,46,E2,DB,47,33,38,\
CA,9B,C1,65,C8,54,92,D1,10,DC,91,BB,3D,B9,1C,D4,\
B5,22,C6,14,BD,08,FD,78,71,68,ED,4E,05,11,5E,E0,\
C4,E2,02,42,7A,68,82,0F,43,D8,1C,91,D6,CB,FF,86,\
08,CF,12,F6,53,83,4C,05,C3,E4,44,9B,D9,50,86,1D,\
85,2F,CC,C7,A4,B4,61,80,FC,55,FA,A0,5E,1B,D7,D3,\
9E,16,D3,0C,71,40,E6,C7,24,15,61,DC,F1,1D,F0,65,\
33,7D,D8,1C,06,F1,F5,B6,07,C8,42,28,A2,E0,51,34,\
B3,A0,73,D0,A7,E7,40,62,46,11,7E,2B,19,35,C4,23,\
DF,3A,29,1B,62,A0,B3,9A,CD,03,79,2E,E9,C9,1E,D1,\
93,30,80,8E,D3,F0,F3,78,AE,5C,EA,57,84,11,21,0F,\
5E,3E,4F,02,B4,E3,DD,B6,C2,47,DC,23,CD,FA,68,50,\
AA,35,60,47,10,F1,AB,9C,C3,9D,B8,14,4E,66,5F,A6,\
0E,F4,50,1E,9B,D6,B9,65,0A,79,CF,DA,08,1D,5D,2B,\
C0,FA,B5,E5,9F,AA,84,F2,A4,31,50,02,A9,BF,DC,83,\
2B,45,D6,02,CD,63,7E,BF,F5,0F,67,28,AD,E5,96,6A,\
32,CB,88,4F,4F,1F,09,51,D7,D4,11,20,20,C5,42,7F,\
D9,C6,B0,53,2E,A8,65,69,F8,6F,70,DB,8D,ED,DF,34,\
01,6E,CC,62,28,82,D0,68,CC,A7,F9,A1,E6,91,69,85,\
8E,0D,5B,DF,9F,C5,DE,0E,AD,9B,B9,D2,6B,0E,52,2C,\
31,41,B5,BB,78,95,CC,FC,2B,20,10,4F,2C,19,FB,21,\
E6,E8,B8,66,C3,B6,7C,1C,40,A6,C9,A9,D2,FF,94,39,\

CONTINUE...

Anonymous said...

22,DB,A2,75,DE,13,39,69,99,81,14,DD,E5,0E,90,E5,\
83,5B,D3,98,06,4C,7A,D0,4B,FA,6A,E6,86,B6,04,26,\
69,32,DF,03,6C,62,00,14,41,13,8B,BE,2F,38,E1,59,\
B9,1D,44,6F,F6,94,7B,9C,1A,38,C1,36,61,22,C7,C1,\
34,B9,F9,A4,01,6C,D1,8B,37,D1,59,50,C1,54,34,07,\
BA,2F,71,5B,6B,8A,C5,63,98,59,8C,6B,F3,09,EF,36,\
FC,95,9E,02,07,B5,7D,CA,71,57,F8,79,40,82,FA,1C,\
B5,81,33,0A,81,51,BF,48,AA,A9,7F,E0,7E,3E,48,3D,\
E0,49,E7,88,31,82,06,9A,5E,3B,4F,37,C9,6A,D8,40,\
19,72,0B,C8,63,54,33,9E,2A,6C,43,B6,92,A2,E7,17,\
D1,E1,3A,17,B5,10,74,EC,93,AC,FB,DE,CB,3F,2B,23,\
81,77,8A,F1,BB,B7,65,DF,16,C6,18,0F,3B,44,5E,85,\
C2,CB,12,D3,D5,04,A3,8E,F8,21,87,83,D8,E2,A3,B0,\
AA,12,A7,0D,32,C4,DB,C4,B1,A0,A3,28,0B,7B,4A,09,\
00,A3,A1,FB,DE,48,EF,38,E6,85,B6,D6,86,A5,C1,73,\
27,A2,BB,32,2E,AC,E1,85,7B,AE,EC,94,0E,D6,F9,C2,\
65,CB,EF,11,27,CB,7D,79,AE,41,D7,7B,85,B9,E5,7E,\
1C,48,7C,2D,44,47,1A,ED,41,76,A2,06,36,A2,D2,06,\
35,32,4C,2C,BC,4D,31,C5,05,31,DB,C0,F5,E4,ED,9D,\
64,7C,24,DE,4F,24,9B,85,89,D8,69,2D,AE,77,BD,33,\
72,1B,04,E8,C2,AB,29,3F,51,EF,C6,E9,04,43,0D,37,\
CE,88,A6,E8,A1,C0,48,2B,7C,4A,EB,95,9C,3D,11,F4,\
F0,CD,2A,5E,D2,DA,02,3F,24,D7,D3,D5,EF,22,19,A3,\
4F,6F,78,4D,DB,69,85,CD,41,3D,E1,B1,27,5E,BD,D8,\
8A,42,A7,F6,38,74,C4,51,A5,81,7F,A7,C8,BA,59,AE,\
09,18,F0,07,19,EC,01,A7,DD,83,6F,AB,DB,58,5B,86,\
89,A7,AC,0C,7A,B2,08,09,44,57,4E,0A,07,2A,64,D8,\
E1,AE,19,EA,2F,39,70,6A,A7,D1,F9,99,83,E0,58,7F,\
F8,38,02,2A,26,0C,7F,DD,68,0C,99,4A,1B,A3,A1,9D,\
4B,81,1A,FF,4D,A8,0E,EB,14,F5,2A,0C,16,AD,E4,E2,\
D5,1E,61,40,C0,87,D1,C4,E2,69,5B,34,E1,64,4F,08,\
55,03,0E,D3,CD,35,3F,B9,78,EF,39,21,75,26,33,8C,\
5B,4A,79,D2,F6,9C,80,E2,1A,A3,EF,7F,40,47,48,49,\
72,05,75,16,0A,DC,43,F8,AC,DD,A1,3A,BF,D5,74,E4,\
E9,4B,A7,D6,6C,98,A3,9D,4B,0A,21,EF,02,8F,B7,0F,\
5D,FF,3C,74,B4,BD,E3,E3,61,9C,64,B2,12,32,2B,7C,\
2C,D0,98,00,AF,9F,A4,85,53,91,88,24,3A,DD,17,FA,\
DC,A6,99,B7,5C,A4,A9,7A,A7,70,5C,D3,6C,28,7F,B4,\
79,7C,74,26,47,D5,DA,CB,CA,45,B4,CD,1D,28,98,FE,\
D3,E6,CA,92,10,81,09,80,47,26,3F,9D,7F,72,F6,BF,\
3D,57,50,31,FA,B5,FF,46,74,75,BE,85,B0,EF,12,14,\
12,E3,B6,0A,A3,86,3D,BB,C6,C3,6F,2C,D3,63,32,9B,\
EE,21,21,84,51,2B,61,9A,24,0E,E9,83,B2,74,91,1E,\
55,DD,B8,C5,F0,AE,91,DD,E3,BC,23,DB,CE,60,5A,F3,\
37,22,96,56,FD,72,7D,95,00,E6,34,E1,ED,BB,73,CA,\
A1,52,A8,EF,31,5B,76,64,A9,ED,CE,39,C3,65,AA,48,\
67,08,BC,F5,C4,E9,5F,60,B3,7E,33,40,08,D4,A2,B7,\
7C,D6,22,E4,3B,A3,70,9D,7C,C4,8A,5E,9B,86,72,23

CONTINUE...

Anonymous said...

"CAFF"=hex:\
37,56,89,15,35,1C,45,89,85,AF,62,BD,BD,1B,12,39,\
B3,18,1C,D2,C7,EF,7B,A8,44,5B,10,74,3D,7B,9F,97

"CDFF"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8

"CBFF"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8

"RW_Mem"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8,\
85,1F,F7,6D,92,0F,16,71,39,5C,FB,C0,01,16,12,46,\
34,E8,26,D7,52,1D,B0,EA,54,8D,72,84,B9,1D,D7,34,\
BC,78,C8,D0,9D,B4,AE,C8,CA,0C,B6,1E,A0,8A,AA,2B,\
97,B3,C7,B2,BF,32,06,4D,25,53,86,27,02,D3,E6,E9,\
75,A5,AC,78,B1,94,2C,A3,4A,1D,B2,FC,B7,9C,28,BA,\
85,0B,11,96,40,2B,1E,D7,47,E2,50,D7,59,00,6F,FE

"RO_Mem"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8,\
85,1F,F7,6D,92,0F,16,71,39,5C,FB,C0,01,16,12,46,\
34,E8,26,D7,52,1D,B0,EA,54,8D,72,84,B9,1D,D7,34,\
BC,78,C8,D0,9D,B4,AE,C8,CA,0C,B6,1E,A0,8A,AA,2B,\
97,B3,C7,B2,BF,32,06,4D,25,53,86,27,02,D3,E6,E9,\
75,A5,AC,78,B1,94,2C,A3,4A,1D,B2,FC,B7,9C,28,BA,\
85,0B,11,96,40,2B,1E,D7,47,E2,50,D7,59,00,6F,FE

My question is: what do i have to do now with that result files from Dumper?

I appreciate any help for that

Best regards,
Zuben (zeg2309@hotmail.com)

Carlos amf said...

please help, error ended license

Carlos


REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00001BA5]
"Name"="Sentinel SuperPro 1BA5"
"Copyright"="None"
"Created"="Mon Dec 22 19:27:14 2014"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
59,14,A5,1B,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00

Carlos amf said...

In win7 32bit with Sentemul works well

Anonymous said...

Hi Son Nguyen, your great instructions are easy and worked pretty fine with a super pro sentinel. Unfortunately the software that I was trying to emulate(which contains an additional .cri file as activation code) recognize that this doesnt belong to the hardware key..

Anonymous said...

Hi Son Nguyen
I am using a aladdin knowledge hardlock usb 1.02
when i try a run RTDumper GUI after retrieving the password 0000:630A with the hardlock emulator 32 that created a hl630A.bin file
i am getting the following error.
Can you please assist
>>>> START HASP 4/HL DUMPING <<<<
Dumping Password: 0000 630A
Dumping with legacy API...
IsHasp: OK (status 1)
GetHaspStatus: OK (status 0)
API version: 8.10
Port number: 0000 (0)
GetHaspStatus: FAIL (status 0)
The requested HASP key was not found!!!
Dumping aborted!!!

Anonymous said...

thanks son Nguyen, i found my problem - 630A

Anonymous said...

@ Son Nguyen: i have a question for you.
HASPHL2010 had a "load dump" function. Why didn't you use it for Step 3. :D

Son Nguyen said...

Hi there,

HASPHL2010 is not freeware. You must have the license to use the "load dump" function.

Anonymous said...

@Son Nguyen:
ah... i have ever loaded successfully with HASPHL2007 "load dump" function, so this the reason for the question above. Thank you for your clear answer :).

M1987 said...

@Son Nguyen

this is the dump log that i got
can you verify with me

Sentinel SRM/HASP/HL Dumper v.1.3 (public)
build on (21:16:27 May 30 2013)

>>>> START HASP 4/HL DUMPING <<<<
Dumping Password: 2CC1 283A
Dumping with legacy API...
IsHasp: OK (status 1)
GetHaspStatus: OK (status 1)
API version: 8.10
Port number: 00C9 (201)
Key type: HASP4 M1 (01 01)
HaspGeneration: HASP4 is connected
HASPNetStatus: Connected key is not a HASP4 Net
HaspID: 03A437B9 (hex), 61093817 (decimal)
HaspCode: OK
HaspEncodeData: OK
HaspDecodeData: OK
MemoHaspRead 1: OK (status 0)
Memory Size: 0038 (56) (status 1)
MemoHaspRead 2: OK (status 0)
TimeHaspID: FAIL (status -29)
TimeHaspRead 1: FAIL (status -29)
TimeHaspRead 2: FAIL (status -29)

Finish dump with legacy API!!!

Dumping with low level API...
Open device: OK (status 0)
Login: F001 (61441)
On Value: 0003 (3)
Dongle Type: 000A (10)
Memory Size: 0080 (128)
HASP HL Memory: Reading...
Logout: OK
Close device: OK (status 0)

Write hasp.dmp
Write hhl_mem.dmp
Sending to solver hasp.dmp
Solver return

Anonymous said...

http://exetools.team-talk.net/

Sign here and ask for help I will help you for free, SRM/HL/SuperPro/UltraPro/SHK/Eutron etc.

M1987 said...

@ Anonymous

I'm already sign in & i posted a message with the problem

waiting for your help thnx !!

Anonymous said...

error 1031: envelope unknown error ???? :o

SkazDime said...

...and this will also work on winxp?

Anonymous said...

as I get the Dtable?

Diego Bittencourt said...

Hello.
Thank you for the article.
I changed the "Type" = dword: 0000004A and installed the "SafeNet Inc. HASP Key" and "SafeNet Inc. Sentinel HL Key" successfully. But when I open the program shows the message: "sentinel key not found (h0007)"
Its ready? take much of the program. Thank you so much !!!

Anh Tú Mai said...

Anh ơi, em dùng window 8.1 64bit và đã làm theo đúng như anh hướng dẫn nhưng không được. Đã cài được dongle nhưng chương trình vẫn báo k chạy được.

ahmed said...

hi
Thank you for writing these instructions.
I'm having error -19
while trying to read dump from hasp HL WITH HASPHL2010.

I have WINDOWS 7 X64
Can you give me advise ?

Anonymous said...

Thank you very much for your explanations. It almost worked for my HASP HL Dongle... but did not :(
At first, I had a yellow exclamation mark in my device list. I replaced the dword EA with 4A as explained and after rebooting, everything seemed OK : with no dongle plugged, those two lines appeared in device manager:
SafeNet Inc. HASP Key
SafeNet Inc. USB Key

Yet, the application did not start saying it could not find the dongle.
When I plug the real USB dongle, there are not two but THREE lines in device mgr:
SafeNet Inc. HASP Key
SafeNet Inc. USB Key
SafetNet Inc. Sentinel HL

So I guess I might need a further step to emulate this additional driver? Correct?
Any idea?

Thank you for your patience!

Son Nguyen said...

Sorry you guy for late response!

Actually I already managed to eliminate HASP, HASP HL and SuperPro USB dongles but maybe I were lucky. And I did that for my curiousness and for funny!

For your cases, you should dig the Internet to find more information about MultiKey Emulator. I cannot advise you guy anything. I'm so sorry!

xuannamvt said...
This comment has been removed by the author.
Anonymous said...

How to handle Sentinel dual key?

Anonymous said...

Is there a chance to do this procedure on a vmware machine?

lite dark said...

hi i have some problem in my emulation method i have my .dmp file but how to change .reg file
plz help me i tried this RTDumperGUI v.1.3 dumper

Anonymous said...

Worked prefectley for me on a HASP4.
Remember ... it's important you reboot as the registry change will take effect only then. If you don't want to reboot you can terminate explorer.exe process and start it agai so that the registry gets read again including the merged file.
Thanks so much for your help.

Anonymous said...

Thank you for the useful instructions. I wan to to emulate a Sentinel SuperPro and i noticed that ssp2mk enumerate my dongle as two dongles when my application is running. What should i do?
Thank you in advance

Anonymous said...

Any Idea What I need to do to eliminate these errors?
>>>> START HASP 4/HL DUMPING <<<<
Dumping Password: 3583 2E1B
Dumping with legacy API...
IsHasp: OK (status 1)
GetHaspStatus: OK (status 0)
API version: 8.10
Port number: 00C9 (201)
Key type: HASP4 Std (00 00)
HaspGeneration: HASP4 is connected
HASPNetStatus: FAIL (status -4)
HaspID: 00000000 (hex), 0 (decimal)
HaspCode: OK
HaspEncodeData: OK
HaspDecodeData: OK
MemoHaspRead 1: FAIL (status -4)
Memory Size: 00F8 (248) (status 0)
MemoHaspRead 2: FAIL (status -4)
TimeHaspID: FAIL (status -29)
TimeHaspRead 1: FAIL (status -29)
TimeHaspRead 2: FAIL (status -29)

Finish dump with legacy API!!!

Dumping with low level API...
Open device: OK (status 0)
Login: F001 (61441)
On Value: 0001 (1)
Dongle Type: 00EA (234)
Memory Size: 0000 (0)
HASP HL Memory: Reading...
Logout: OK
Close device: OK (status 0)

Write hasp.dmp
Write hhl_mem.dmp
Sending to solver hasp.dmp
Solver return

>>>> END HASP 4/HL DUMPING <<<<

Anonymous said...

Hi i'm trying to install "Multikey32bit" on a win7 32bit system but the steps described above doesn't seem to work for me.

The .reg dump file was provided for me by a friend and the the installation process works on 64 bit systems, even on win 8.1, but the Multikey driver doesn't install for me correctly on my 32bit win7.
It starts installing and after a second it tells me that the driver couldn't be installed properly, and it appears in the device manager as "SafeNET Inc. USB Key" with an exclamation mark, hence it didn't install properly.
The dongle protected software want's me to install "Safenet Sentinel runtime" and i do so every time.
The older version of the software uses "Hasp-HL Aladin 5.22" so i have it already installed on my machine, and it did work with "HaspHL2007 emulator" (its simmilar to the HaspHL2010 one) just fine. I even uninstalled the the driver what was installed by HaspHL2007, and stopped it's emulator service so there are no conflicts between the old emulator and the new Multykey32bit, but it doesn't seem to work anyway.

I even tried to install it in many variations:

1. Installed the software + Hasp-HL Aladin driver 5.22 + the new version software + Sentinel runtime, Multikey32bit didnt install properly, "SafeNet Inc. USB key" with exclamation mark appeared in device manager, the software didn't work-saved (it has a saving restriction without the dongle)

2. Installed the new version software + only the Sentinel runtim, Multikey32bit didnt install properly, "SafeNet Inc. USB key" with exclamation mark appeared in device manager, the software didn't work-saved (it has a saving restriction without the dongle).

3. Installed the software + Hasp-HL Aladin 5.22 driver, the Multikey32 driver installed, and appeared in the device manager as "Aladin usb key" but the new version software didn't work-saved (it has a saving restriction without the dongle).

I'm guessing, that there is some incompatibility whit the "Sentinel runtime" and the Multikey32 bit driver, or i don't know, it beats me. Installing Win7 x64 or Win8.1 x64 wouldn't be the greatest solution for me because my PC is a bit old and has only 2 gigs of DDR2.

I would really appreciate if someone could help me out in this in this matter.Sorry for the long description or my bad English. Thanks in advance!

av said...

Hi everybody,

I have a HASP SRM dongle and i want to know if it´s possible to emulate it.

Once i create the .dmp file, i don´t know what to do after for emulate it. I read that this is very difficult and even more under Win7 64bits.

Any idea of this?
Thanks

Zaeem Abbas said...

Hi Dear,

I have hypack 2015 and I am trying to dump by using HASPHL 2010 but its not showing the passwords what I do?

Moshe pour-david said...

HI
FIRST OF ALL THANK U FOR THE MANUAL.
THE "SafeNet Inc. HASP Key" is missing. what can i do to fix it?
* i am using hasp hl

Son Nguyen said...

Hi Moshe,
You need to edit a little bit the registry file. Please open the registry file by some text editor (Notepad or Notepad++) and change "Type"=dword:000000EA to "Type"=dword:0000004A. After that, you must Merge it into the Windows' Registry and then restart your PC. Good luck :)

Cristian Vrinceanu said...

Hi Son Nguyen,
i've tried many times to emulate my SuperPro NetSafe Sentinel but i still can't run it,let me say what i do.
First of all i open SSP2MK_1.2,i plug my Sentinel and than i do on the following code Save as... which saves a .reg file on my desktop.

Code:

REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\000012A0]
"Name"="Sentinel SuperPro 12A0"
"Copyright"="None"
"Created"="Fri Feb 20 18:44:15 2015"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
85,04,A0,12,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00



I didn't edited it becouse you don't say to do it for SuperPro,or maybe i misunderstood.

Than i do "Merge" and follow the next steps.

I didn't even changed the name of the .reg file.

Once i'm done with all the steps i can find the Sentinel Driver installed but even with that my software runs in DEMO mode.

What should i do?

With the Sentinel Plugged works properly,without it doesn't.

Cheers,
Cristian

Anonymous said...

Dear Mr Son Nguyen
i change to
"Type"=dword:0000004A"

but when i run aplication show message "Debugger detected" program error windows 8.1 x32bit

how to solve this problem

Anonymous said...

it s working very good!! i m trying also in windows 8 Pro64bit.. but i m having some problems.. it blocks some driver unsigned... i m surfing to get the solution and i ll share here if i get it!

Anonymous said...

This is a great post.
Thanks for your help in these cases where whichone think are alone.
This is a comment to help someone else who can present the same problem with 2.17 hasp key to be installed on windows 7 64bit.

Go to the following address:
Control Panel \ All Control Panel Items \ Windows Update \ Change Settings

Or locate Windows Update directily
And select the "Change Settings" located on the left side.

In "Important Updates" select the option "install updates automatically (recommended)"

when inserting the key, let windows update drivers hasp look.

I personally have never had success with Windows Update, but this time, fortunately it worked. That's why I share this solution.

tanks a lot for your post.

thanga maths said...

Hi Son Nguyen
please suggest me how to find the .dng file from .dmp files

TJ said...

Thanks so much Son for putting this blog together, I am really hoping you can help me. Running Sentinel Superpro, I did all the steps and Sentinel Superpro is showing up under USB Drivers without the dongle plugged in. When I try to open the software it says software license is expired. With the dongle plugged in it works fine. Any suggestions?

Anonymous said...

Hi,
I have one question.
What I can do with expired dongle. Is it possible to change expiration date and reuse it?

Anonymous said...

Thank you for your great post.
I finised progress as per your post.
And I met a error as below when I open my protected software.

"Unable to find authorized harware key~~~"

Anonymous said...

Thank you for your great post.
I finised progress as per your post.
My key is SafeNet USB UltraPro and I met a error as below when I open my protected software.

"Unable to find authorized harware key~~~"

Anonymous said...

Thank you very much for the discription.

i get a code 19 if i press DUMP?

can somebody help me?

Anonymous said...

Hi,
I'm run HASPHL2010 on Win 8.1 64bit.
It's tell me error 1068.

Is it because my OS.???

Sunil Kumar Rathore said...

Dump with srm dumper 2.5(by tyrus)
Make usb trace
Send to skr706@gmail.com
I will solve it for u.

Sunil Kumar Rathore said...

Hi zaeem
Hypack uses unikey protection so ca nnot be detected by hasp dumper
It can also be emulated by some good solver if u make a good usbtrace and give him.
Sunil
skr706@gmail.com

Sunil Kumar Rathore said...

Sorry srm dumpet 1.5(by tyrus)
Slso dump by h5 using 2 password u get by hadp hl2010.

Sunil Kumar Rathore said...

Its possible in emulator.
Sunil
skr706@gmail.com

Sunil Kumar Rathore said...

Try with hasphl2007
Rightclik run as admin.
Else try in other computer.

daniel han said...

Hi Son Nguyen,
I've tried many times to emulate my SuperPro NetSafe Sentinel as below but i still can't run with below message.
Please help me...

-----------------
Unable to find authorized hardware key. Your key #---- may be defective(error 0xaefa,2). Contact --- for a replacement.
------------------

REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00003BDC]
"Name"="Sentinel SuperPro 3BDC"
"Copyright"="None"
"Created"="Fri Mar 13 10:09:49 2015"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
03,54,DC,3B,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00


Son Nguyen said...

Hi Daniel,

I see that your registry file is not good. Values of "sntMemory" are almost zeroes. This is wrong! You should check the process of creating registry file again. Good luck :)

daniel han said...

Thank you for your reply.
I followed your instruction completely and I got the those registry file.
Is there other method to make resistry file?

Son Nguyen said...

Hi Daniel,
Because your dongle type is SuperPro, please use SSP2MK_1.2 to generate registry file. I already put the download link in my post. Please check and download it. You should study SSP2MK_1.2 to understand how to generate registry file for MultiKey emulator. At the present, I don't have any SuperPro dongle so I cannot write the guideline for creating registry file using SSP2MK_1.2.

Brien Lord said...

can you give instructions on how to do emulate a 25 pin hasp dongle

Sonny36 said...

Thank you very much for the discription.

i get a code 19 if i press DUMP?

can somebody help me?

Anonymous said...

I got same problem as yours. But i did not get a way to resolve. Could you explain how to make safenet show in "usb controllers" tab. My virtual have been shown in system device. Thanks for your advice.

Anonymous said...

If you're getting error 19 it means you're not running the software before you hit 'dump'.

Sunil Kumar Rathore said...

Old desktop computers have 25 pin parallel port for printers. That can be used.

There are convertors from 25 pin parallel port to usb. Use this and dump it by any computer.

Hasp hl2007.exe can be used for dumping the dongle.

Brien Lord said...

@Sunil Kumar Rathore
i was able to get the dump file and reg file off of the xp machine and i have every thing going on the windows 7 64b machine but when i try to load the dump file and emulate it with Hasp hl2007.exe on the windows 7 64b machine i get error 1275 and when i try to load the dump file into HASPHL2010.exe i get an error that says please upgrade your dongle file contact sales@dongleservice.com

can you help me to emulate the 25 pin dump file from a windows xp machine to a windows 7 64b please?

Anonymous said...

Thank you for these instructions...worked perfectly.

The part about changing 'dword' is required for it to work!

Anonymous said...

Hi, having hard time installing the emulator, I have HASP 4 dongle key. I followed your instruction 1 by 1. but the device doesn't show on device manager.. am i missing something? Please help me.

Mas Adi said...

Hi Son,

thanks for sharing
i try to follow your step but when i go to tab DUMPER, the button Dump (above the Refresh button) cant be clicked
need your help here

Mas Adi said...
This comment has been removed by the author.
Anonymous said...

Sir,

I am siddharth, everything worked well for me, but when I run the software, I am getting "Desired vendor daemon is down. Check with lmgrd log file or try lmreread" error message. Please give me solution if possible.

Thanks,
Siddharth

Sheldor said...

Hello,
thanks for the great tutorial . It works perfectly on Windows 7 .
But there is , unfortunately, with the driver problems in Windows 8.1 and 10 , are there already a solution ?

greeting
Michael

Son Nguyen said...

Hi Sheldor,

On Windows 8.1 you should do the following steps to install MultiKey:

1. Reduce UAC to lowest level

2. You follow the steps in this tutorial to disable drivers signature enforcement http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/

3. Install MultiKey as usual

You also need to use dseo13b.exe to sign multikey.sys driver and remember that MultiKey only works in Test Mode. You must always stay in Test Mode.

For Windows 10, I don't have any experience.

Bayu Blukutuk said...

Hi,,
sorry,,my english language isn't good..

After using those method,,is there any side effect to the dongle??

my company have just 2 HASP dongle,,i'm affraid if i use those method, the dongle won't work anymore..

NSOLANOC said...

Is possible tu emulate hasp/hardlock dongle if i haven't the original parallel port or USB dongle connected to computer?

How may i overpassing this issue?

Anonymous said...

My dongle is "Sentinel SRM/HASP/HL Dumper v.1.3 x64 (public)" type. I dumped it with RTdumper and it produces only .dmp files. These files have the structure of .reg files but when i merge them into registry, the emulator does not produce any key emulation. Is there something that i should do to emulate SRM dongle with multikey? Or is it not supperted.

Ryan said...

Hello, following instructions but upon final reboot after disable driver signature, the SafeNet Inc. USB Key fails driver install. Any ideas?

Anonymous said...

I have working registry files, but I need the machine ID to reflect a number higher that is capable from two sets of HEX (65535). I need the machine ID to change to 71414. Can anyone help me to make the necessary registry modification to show 71414 as my machine ID ?

Anonymous said...

Hi Son,
I’m blocked in the first part with the dumper, in DUMPER tab the password not displayed in HASP/HL Dongles window, any idea?
Thank you for your help.

Anonymous said...

I followed the guide step by step, with W7 32bit. after restarting the system sees SafeNet USB SuperPro / Ultrpro. but it does not work the software says serial number not recognized following reg file.
REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\0000DB7F]
"Name"="Sentinel SuperPro DB7F"
"Copyright"="None"
"Created"="Sat Apr 04 23:21:19 2015"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
B3,06,7F,DB,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00

Son Nguyen said...

Hi there,
Because your dongle type is SuperPro, please make sure that you already used SSP2MK_1.2 to generate registry file. You should study SSP2MK_1.2 to understand how to generate registry file for MultiKey emulator. From your registry file, I see the value of "sntMemory" is not good. It should be not zeroes. Please check again. I am sorry I cannot write a tutorial for using SSP2MK_1.2 right now.

Irvan gemini said...

hai sir, can u tell me how to know what type dongle i use in my software???

Anonymous said...

hello;
I work with win7 x32 or x64; and I have a usb dongle which is marked hasp hl; i downloaded hasphl2010 and I execute as you described, and when I run my program protected to retrieve the two passwords with drump tab nothing is displayed, and thank you in advance

Anonymous said...

I tried this procedure but something failed. What do I have to do to reverse everything and start again?

Sunil Kumar Rathore said...

Hi brien
Emulate the dump to multikey and then use in win 7 using the steps mention above.

Else send your dump to me at skr706@gmail.com and the software name.

Sunil Kumar Rathore said...

Rt dumps are to be decoded to get the correct data for emulation.

Dump the dongle by H5 using two password to ectract hasp data
Dump the dongle by dumper 1.4/1.5 by tyrus to extract srm data.
Make a good usbtrace and post it. Someone will help you.

Sunil
skr706@gmail.com

Sunil Kumar Rathore said...

Run your sftware and press refresh button.
If its hasp. It eill show the password.

Anonymous said...

Hello Son Nguyen,

i have a virtual aladdin hardlock (multikey) run on win7 x32.. but not work in win7 x64 :( is a driver problem?!

Lawser L said...

how to upgrade dng file. please help

Markus said...

Hey Guys for all who have proplems with ssp2mk here some things to know!

Start ssp2mk:

1. plugin Dongle
2. Click top left to search for the pluged dongle
3. If the Dongle was found right click and click on Dump.
4. one more right click on the dongle now select in options mutlikey older 18.x.x
5. Now you can save the reg file an install it.

6. something to know:
I have many zeroes in my regfile but that is sometimes normal there are no algos.

Maybe i can help someone of you!

Good Luck guys

david said...

Hi Mr.Son Nguyen
I'm Ranjith
i have follow your instructions to make the emulator. everything is done emulator works better.
in device manager showing HASP and USB key good. but when i starting protected software it's saying
HASP key not found
please help me to fix this error

antonio said...

hi everyone, i like so much this blog because some times ago help me to clone a usb sentinel, but now i have a problem. using the same reg i can't run the software.
for cloning the hardware key, i useed hasp2010 to find the password, then i useed h5dmp with the 2 string 0xpw1 0xpw2. then with unidmp2reg i created the .reg.
so i install multikey 64 bit and the game was done.the software has running.

now , i try to put the same key in a new laptop with win7(as before) but dongle id is not recognized . why? anyone has solutions? this is my reg:

REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\225D0ABE]
"Name"=""
"Copyright"="Copyright (C) 2014 Admin"
"Created"="10/02/2014 12:39:58"
"DongleType"=dword:00000001
"SN"=dword:0C8CE2E7
"Type"=dword:000000EA
"Memory"=dword:00000001
"SecTable"=hex:2B,1C,D9,DC,27,14,D5,D4
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,0A,01,0E,01,0B,28,33,00
"Data"=hex:\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
57,42,50,54,01,00,00,00,10,00,00,00,00,00,28,B1,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColumnMask"=dword:000000C3
"CryptInitVect"=dword:0000001F

i still have hasp.dmp and hhl.mem.dmp.

Thanks in advance and sorry for my english.

antonio said...

i forgot to say that i try to make it run on win xp too (32 bit) but still not recognized the dongle.
is it possibloe from hasp.dmp and hll.mem.dmp convert to hasp2007 .dng?

i have a .dng of another software and i try with h5dmp to create the reg but h5dmp says *hasp4* error .also with Son Ngueyen's procedure can't create the reg. any idea?

the .dng work perfectly in xp, and a way to run on win7 is with vmware (with unit mode seeting semms like work in win7).

another question is: is it possible share a dng hasp2007 over network like a usb? there are some software like usb over ethernet or usb over network.

Thanks in advance.

henderson said...

Hi Son Nguyen.
I followed all your steps, read every comment in this page and could not make my dongle work.

I have a hasp4 dongle. I fallow every step of your tutorial. I change that last bits at the registry (000000EA to 0000004A).
But my software keeps telling me there is no keylock available.

Any tips I can try?

Anonymous said...

Hi. If any body ready to help me to generate I can pay him money.

shekh rijwan said...

Son Nguyen sir
PLease Help Me

My Dongle
Who is RTDumperGUI in the dongle dump but he is not coming reg file

I do not have a password dongle

Sentinel SRM/HASP/HL Dumper v.1.9 (public)
build on (19:35:34 Dec 21 2013)

>>>> START SENTINEL HASP DUMPING <<<<
Found: SafeNet Inc. USB Key (0)
And trying to read it...

Success to open device...
Key Type: 0xEA
Vendor ID: 83449 (000145F9)
Hasp key ID: 870687500 (33E5A30C)
FW Revision: 3.25
HW Revision: 6.1.0
Dongle Form: 84 (54)

Dumping, please wait ...
RW memory size: 112 (0070) (6)
RO memory size: 112 (0070) (7)
Feature number: 13 (000D) | 5 (0005)
Read sysinfo: OK (code 00), (status 0)
Read RW memory: OK (status 0)
Read RO memory: OK (status 0)

Saving. Please wait...

Saved Dump_EA_83449_0.dmp

shekh rijwan said...

The registry will find it files

NJ Boyd said...

Just a heads-up it looks like someone's reposted a stripped-back version of your post behind a Scribd pay-wall here:
http://www.scribd.com/doc/241030374/StepsForEliminatingDongleOnWindows7-pdf#scribd

Anonymous said...

I still try to emulate dongle. And I got stucked at point 3. Actually there is a mistake in this tutorial. I can't type two parts of dongle password in RTDumperGUI. It's possible only when you use SSP2MK_1.2. With RTDumperGUI you just have to follow readme.txt. Also I still do not understand what exactly I suppose to do with my new created registry file? It has dmp. extansion and located in HASP-Multikey Emulator folder on the desktop. I chached extension and name of it to my dongle password (4B1740D7.reg) and left at the same folder on the desktop. Now regarding to this manual I have to go to regestry editor and replace some file. How? What file?)
Thnx man!

Anonymous said...

HI, thanks for your post
I used RTDumperGUI to create .reg file. it creates two .reg files and a .dat file.
i edited each of them and followed the steps entirely but the software still needed Hardlock. mine is Aladdin hard lock. with this passkey 000026AC.

Omkar Eswar said...

I am using Aladdin HASP SRM dongle.
As per your procedure, i installed the mysoftware and HASPHL2010, Digital Signature Overrider.
I followed step by step procedure,in Reading your step but i am unable to get the Dump tab activation in both Windows 7 (32 bit/64 bit) operating system. (Please find the enclosed attachment).

Please help me in this matter.

I will be very thankful to you.

Please reply me ASAP.

Anonymous said...

Contact us at:
http://www.cadshop.ru
or
email to donglebackup@gmail.com

Anonymous said...

Is the dongle for www.xcapi.com working?

Anonymous said...

Hi

It was nice to see your effort. I've got a Unikey dongle with a software and not able to run it without the usb dongle.

Can you help me regarding this problem as it's a hassle to keep it in my pocket for 24/7.

Regards

Anonymous said...

Hi,

I previously have succeeded "undongle" a certain software by using HaspHL2007 and EDGEHASP. And I have noticed that they only worked with 32bit windows versions.

Is there a way to convert it to 64bit? Although I have tried installing multikey on 64bit, HaspHL2007 will work.

Also, is there a way to convert this *.dng file for HaspHL2010x64?

Thanks

P.S. don't worry I always check on this website from time to time.

Anonymous said...

Hi Son Nguyen

I have one question, i need to emulate CryptoBox Marx Dongle,

this procedure works for that? or just for HASP dongles

Do you have any idea for emulate this type of dongle????

Anonymous said...

Hi,
My name is John
I have a program nammed caddie 20 and it also uses a dongle run the full version , is there anyway i can emulate this dongle?

Anonymous said...

I want wilcom embroidery studio e3 crack. If anyone successfully crack this software then please give me the crack link.

Also I have a dongle damp. This is another software. My dongle is damaged/broken. I want to upload it. Please give me your email id. I want this crack dongle. My id is rnf_bd@yahoo.com

Anonymous said...

Hi so does the computer have to stay in test mode for it to work with out the dongle Thanks

Son Nguyen said...

Q: Hi so does the computer have to stay in test mode for it to work with out the dongle Thanks
A: Yes, your computer must stay in Test Mode.

Anonymous said...


hello, could you pls help me with some advice?
I have this dump :[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Emulator\HASP\Dump\xxxxxxxx]
"Name"="xxx xx"
"Copyright"="2010"
"Created"="12.12.12 12:12"
"SN"=dword:7cc7f71f
"Type"=dword:00000001
"Memory"=dword:00000004
"SecTable"=hex:d1,e1,d1,e1,d1,e1,d1,e1
"NetMemory"=hex:ff,ff,ff,ff,ff,ff,05,00,ff,ff,fe,ff
"Option"=hex:01,01,00,f0,23,00,00,00,00,00,00,00,00
"Data"=hex:40,54,45,53,54,23,31,23,32,23,34,23,35,23,23,23,23,23......

I succesfuly installed multikey on win 7 64-bit ( per your instructions) but i can;t seem to get this key to work.Is there something i must change in the key? pls be aware that i do not have acces to the original key anymore to make another dump. thx for any reply.

Anonymous said...

Hello,

will it also work for WIN 8.1 and the coming update WIN 10?

Thanks

Monica Santos said...

Goodnight Son , sorry English, translated in google translator .

My problem is as follows :

I'm trying to follow the steps as you described , but when I run HASP / hardlock , the " Dump " is blank. So I tried to run the Sentinel dongle Super / Pro , but the results obtained are 4 messages one below the other saying " . Dumping disabled , Unable to access Sentinel SuperPro system drive , Failed to initialize SPROMEPS API , Failed to access SNTNLUSB device"

I have also changed the key to 0,000,004th still not the right. And when I try to open the engineering program the following message appears : " Sentinel LDK Protection System - Sentinel Key not found ( H0007 ) .

Can you help me? The program I am trying to open is the QiBuilder . You do not have to open that program?

If you can give me a hand thank you very much .

Paulo Mar Verona said...

How can I know if my dongle is HASP? how can i install the safenet USB superpro/ultrapro in windows 2008 server using multikey? Thank you

Yur said...

Hellow? I can't dump my program for step 3: dumping 7780:08E8 error -17
What is it?
Thanks

Yur said...

Hi, I have a same problem!
Mihai AbrudanOctober 24, 2014 at 5:58 AM
Hello. First of all thank you for this great post. I tried to clone a usb HASP HL dongle, everything went ok but the application that requires the dongle does not work, saying "no security key detected". The drivers seem to be installed ok, I have changed the dword for Hasp HL, in device manager I have SafeNet Inc. HASP Key and SafeNet Inc. USB Key
but when the dongle is connected there is a new one called SafeNet Inc. Sentinel HL Key and two SafeNet Inc. USB Key . Any ideas? Thank you!

Reply

Tạ Công Thắng said...

Chào bạn Sơn Nguyễn,

Bạn hướng dẫn giúp mình sử dụng emulator này để cài PM W oody 2.0 với nha,
mình làm theo hình hướng dẫn mà vẫn không được, còn phần hướng dẫn download trên mạng cũng không làm được.

Cám ơn bạn trước

Anonymous said...

Hi again,

have upgraded to Win 10. Now under my USB devices there isn´t anymore Safenet USB Super/Pro.

Although installing multikey isn´t working anymore.

Driver problem or what else could it be?

Jonathan Jorge Manalili said...

Hi SOn,

Please help me , I'm stocked on running the emulator. I cant dump. What the problem with that?I lost our company dongle and I will pay for that We have 1 remaining dongle, i'm planning to clone that so i can suggest to my boss to use that clone :( Please someone help me.